PRONAR PRONAR 5110, Руководство оператора

Страница: 12 / 122

Section 1: GENERAL INFORMATION
1-4
FACTORY GUARANTEE
The manufacturer handing over the new tractor guarantees that the product has no faults in
workmanship or material that could be revealed in the production process.
The guarantee involves tractor repairs (replacement parts included) at the cost of the guarantor
(defined in the guarantee book). The detailed guarantee regulations are contained in the guarantee book
attached to each tractor. The guarantee book is the only document enabling the purchaser of the tractor to
benefit from guarantee service at authorised service points and cannot be replaced.
ATTENTION: Equipment protected by lead seals may only be repaired by authorised
personnel of service centre. Unauthorised breaking of seals shall cause loss of
guarantee entitlement
ATTENTION: Failure to observe instructions contained in Tractor Operator's Manual
shall cause loss of entitlements arising from the guarantee.
Costs of repairs of damages arising as a consequence of use contrary to Operator's
Manual shall be borne by the tractor's purchaser.
HANDING OVER TRACTOR TO PURCHASER
The new tractor shall be started for the first time by the guarantee mechanic or the authorised
employee of the commercial service provider.
The first start-up includes specific inspections and checks of tractor operation and also advising and
cautioning the purchaser on the basic principles of using the tractor. It is recommended that the person, who
shall operate and use the tractor is present. The owner or user shall obtain instruction on the following
elements:
•
instructions referring to safe operation of the tractor,
•
location and significance of engine and tractor numbers,
•
indicators and steering equipment,
•
running-in,
•
method of starting and stopping,
•
selection of gears depending on working conditions,
•
use and adjustment of brakes and clutch,
•
use and adjustment of differential lock mechanism,
•
application of PTO,
•
operation and control of hydraulic system,
•
connection and disconnection of implements to rear and front (optional) three-point linkage,
•
oil and grease lubrication points,
•
change of oils,
•
change and cleaning of filters,
•
operation and air bleeding of fuel system,
•
engine cooling system, v-belt tension,
•
electrical system operation,
•
steering system and change of wheel track spacing,
•
tyre pressure,
•
connection, application and control of external hydraulics,
•
securing nuts and bolts,
•
transport and storage of fuel.