PRONAR PRONAR 5110, Руководство оператора, Страница: 29 / 122

Section 4: STEERING AND OPERATING CONTROLS
4-7
INDICATOR PANEL OF PRONAR P5 type TRACTORS
Figure 4-12 Indicators of PRONAR P5 type tractors
1 – rev counter; 2 – control lights panel; 3 – fuel gauge; 4 – coolant temperature gauge; 5 – engine
hours, speedometer and PTO shaft speed indicator; 6 – air pressure gauge in pneumatic system; 7 –
battery charging level indicator.
Rev counter and engine hours, speedometer and
PTO shaft speed indicator
Rev counter 1 (Figure 4-13) indicates engine
revolution speed [rpm].
Counter 2 shows number of engine hours worked
and tractor travelling speed. Indicator 3 shows
rotation speed of PTO shaft I (rear), and indicator 4
shows rotation speed of PTO shaft II (front - option).
Rotation speed value is illuminated after connecting
PTO shaft with switch 41 or 44 (Figure 4-10).
Indication accuracy is 10 rpm.
Figure 4-13 Rev counter.
1- crankshaft rotation speed scale;
2- engine hours worked and tractor speedometer [km/h];
3- PTO I shaft rotation speed indicator (rear)
4- PTO II shaft rotation speed indicator (front) -option
Engine working hours counter indicates and remembers the number of engine hours worked.
After switching on ignition the display shows the actual number of engine hours worked to a precision
of 0.01 engine hours. The engine hours counter operates from the instant of starting engine.
Maximum indication is 9999.99 engine hours.
The instant that the tractor moves travel speed is shown on display in km/h. Indicator accuracy
is 0.1 km/h. Maximum indication amounts to 99.9 km/h. Speedometer is programmable for type of
tractor and tyre size. This operation may be performed by PRONAR's Authorised Service.
ATTENTION: The speedometer programming operation needs to be performed
when tyres of different size are replaced.