PRONAR PRONAR 5110, Руководство оператора

Страница: 42 / 122

Section 4: STEERING AND OPERATING CONTROLS
4-20
FRONT AXLE DRIVE
Drive should be engaged:
- when the necessity arises to overcome temporary resistance on paved roads and hard subsoils,
- in fieldwork with bad soil traction properties (very damp, covered with plant remains, loose soil etc.),
- in fieldwork if the machine (implement) combination requires great traction force,
- in use of the front axle for braking the tractor.
Figure 4-27 Front axle drive connector may be
set in two positions:
1 - drive disengaged (upper);
2 - drive engaged (lower).
ATTENTION:
Do not engage drive during travel on a paved roads.
Do not use engaged front axle drive at speeds above 15 km/h or turning front wheels
more than 30.
°°°°
In the event of necessity to use front wheel drive during travel in reverse gear, drive
should be applied briefly (position2, Figure 4-27).
ATTENTION:
During use of tractor with foreloader observe the above instructions and limitations
contained in loader Operator's Manual. Failure to observe instructions may cause
damage to elements of front axle drive system.
1
2