1
2
3
A1441
Fig. 2: The figure shows the assignment for the function key [F5].
1. Numerical assignment; automatically active when inputting
numerical values
2. Function assignment is disabled if you use
[ENTER] in the con‐
trol panel of project to switch to editing mode. Instead, the
numerical and / or alphanumerical assignment is activated.
Simultaneously a message is emitted that the function keys are
disabled.
3. Alphabetical assignment; automatically active when alphanu‐
merical values are entered. Numerical assignment is also avail‐
able. When entering hexadecimal values, only the alphanumer‐
ical assignment of keys
[A] to [F] plus numerical assignment are
active
On the KP300 Basic, you either move within the menu or operate
the current project.
Proceed as follows:
1.
To move around in the menu of the KP300 Basic, use the
cursor keys or press
[TAB]
ð
Highlighting is shifted to the corresponding menu entry.
2.
To execute a menu command, press
[ENTER]
ð
The next menu level is displayed.
3.
If a menu level contains an input field, use the function keys
to enter the corresponding value.
4.
If a menu level contains a list:
n
Press
[ENTER] to activate operation of the list
n
Use the cursor keys to switch between the list entries.
n
Press
[ENTER] to select a list entry
5.
To enter a value in the menu:
n
Press
[ENTER] to accept a value
n
Press
[ESC] to discard a value or return to the overlying
menu
n
Press
[Del] to delete a value
Use the function keys to enter numbers and characters.
Proceed as follows:
1.
Activate operation of the operating object.
2.
Press the corresponding key until the desired character is
shown on the screen.
Depending on the format of the operating object, you can
limit the assignment of the function keys to letters or num‐
bers.
The desired characters are applied after approximately one
second or immediately after pressing another key.
Menu operation
Entering numbers and characters
General information and operating concept
8
Содержание ProMaqua Dulcodes A
Страница 82: ...A1903 Fig 79 Bearing cover 26 Open the bearing cover to obtain access to the slide bearing Maintenance 82...
Страница 118: ...118...
Страница 119: ...119...
