manualshive.com logo in svg

ProMinent OZLa 06 O, Руководство по эксплуатации

Поделиться
Скачать
ProMinent OZLa 06 O Скачать руководство пользователя страница 38

The authorisation scheme is arranged according to users and

incorporates the keyboard lock.
The following users are set up for the operator:
The 

‘OPERATOR’  user is automatically activated once the system

has been switched on without any further action being required.

The 

‘OPERATOR’  can:

n

Stop the system.

The 

‘EXPERT’  user can:

n

Set the control variable.

n

Set the operating mode, internally, externally.

n

Set the system time.

9.5  Log in/Log out. User: EXPERT

A3478

Fig. 9: Login window for Expert mode
A system login is only required for Expert mode. The system auto‐

matically asks for login data for relevant functions. The 

‘EXPERT’

user can make all changes possible for the operator in Expert

mode. The 

‘EXPERT’  user can activate or deactivate the keyboard

lock in this mode.
Auto logout: If the 

‘EXPERT’  user has not logged off, the

‘EXPERT’  user's login will expire after approx. 30 minutes.

Pressing the Logout key logs the user out immediately.

Operation

 

 

 

38

Содержание OZLa 06 O









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды