Proline PROline VN2000, Руководство по эксплуатации

Страница: 9 / 42

Getting started
1 Unplug the aerial cable from the back of your television and plug it into the ANT IN
socket on the back of your video recorder.
2 Plug one end of the aerial cable provided into the aerial socket on your television. The
cable only fits one way round, so look at the ends to see which one matches the
television aerial socket. Plug the other end of the cable into the ANT OUT socket on the
back of the video recorder.
3 Plug the moulded mains plug on the end of the mains cable into the mains socket on your
wall and switch on the power (if there is a power switch).
4 Switch your television on and select the programme number that you have chosen for the
video channel (see the instruction book for your television).
5 Press the POWER button once on the video recorder
(the display will get brighter).
6 Tune the television in the UHF waveband until a picture like
the one below appears, and memorise it under the video
programme number. (Please read the instruction book for
your television to see how to do this.)
7 Switch your video recorder off by pressing the POWER button
again.
8
EURO-AV
ANT . OUT
ANT . IN
EURO AV2 DECODER
AUDIO
L
R
Mains cable
Aerial cable
(provided)
Aerial
cable
Auto Set!
OK:confirm MENU:end
◆
If you cannot get a clear picture, please read ‘What to do if you get picture
interference’ on page 12.
◆
If you don’t see the picture in step 6, put a pre-recorded video cassette in the
video recorder at step 6 and try again. Pre-recorded video cassettes that you buy
or hire automatically play when you put them into the video recorder, so the
picture that appears on your television will be the picture from the video
cassette. We have described how to load a video cassette on page 22.
v i d e o r e c o r d e r
Setting up the
For televisions without a Scart socket