Proline PROline VN2000, Руководство по эксплуатации

Страница: 36 / 42

Setting the timer
1 Switch your television on and select the video channel.
2 Press the MENU button once. The pointer will be on ‘Timer
program’.
3 Press the OK button to get the timer programme review
display.
4 Each line on the screen represents one timer programme.
Press the PR+ and PR- buttons to move the pointer to a blank
line (all dashes).
5 Press the OK button. The next on-screen display asks how
often you want to make the recording. The pointer will be on
‘once’. You can use the PR+ and PR- buttons to move the
pointer to repeat the recording at the same time once a week,
at the same time each day - Monday to Friday, at the same
time each day - Monday to Saturday, or at the same time
every day.
6 Press the OK button to confirm your choice in step 5 and
display the timer programme information. If you do not press
another button within one minute, the timer display will go
off and you will have to start from step 2 again.
The dashes on the ‘PR’ line will be flashing. Press the number
buttons 0 to 9 for the television channel you want to record. If
you want to record from other equipment that is connected
with a scart cable, press the PR+ button on the remote
control to make ‘AV’ appear on the ‘PR’ line.
7 Press the OK button and enter the start time, end time and
start date by pressing the appropriate number buttons 0 to 9.
As you enter each detail, the next one flashes to show it is
ready to be set. On-screen prompts will appear to remind you
what the buttons do.
8 Adjust the tape speed (SP or LP) and PDC (on or off) by
pressing the PR+ button.
9 If you need to step back to correct an entry, press the
button. To skip forward over an entry, press the button.
The entry you select will flash. When you have entered all
the details, press the
button until ‘OK confirm’ appears on
the bottom line.
• You can press the MENU button to abandon programming and
start again.
continued over the page...
You can set the record timer without VI.
PR+/-:set (AV1/AV2)
0-9 :setup(PR)
/ :correct MENU:end
PR --
Start Time --:--
End Time --:--
Start Date --/--
Tape Speed SP
PDC OFF
TIMER PROGRAM (Weekly)
How often do you want
to record this program?
PR+/-:select
OK:confirm MENU:end
Once
Weekly(Once a Week)
Daily(Mon-Fri)
Daily(Mon-Sat)
Daily(Mon-Sun)
TIMER PROGRAM
PR START END DATE
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
PR+/-:select
OK:confirm MENU:end
35
r e c o r d i n g s
P r o g r a m m e d