Proline PROline VN2000, Руководство по эксплуатации

Страница: 41 / 42

40
A p p e n d i x
Appendix 2 (continued)
Canal+
• When you have selected ‘Decoder (Pay TV)’ as the AV2 socket function, ‘Canal+ set’ will appear
on the ‘Program pre-set’ menu. Canal+ is a French cable television service which is not
used the UK, but we have described below how you change the Canal+ setting.
1 Press the MENU button until the main menu appears.
2 Press the PR- button once. This moves the pointer to
‘PR preset’.
3 Press the OK button to see the programme pre-set menu.
4 Press the PR- button twice. The pointer will move to ‘Canal+ set’.
5 Press the OK button to see the ‘Canal+ set’ menu.
6 Press the PR- and PR+ buttons to move the flashing pointer to
the channel you want to change. Press button if you
want to check the picture. In the top right you will see
‘CANAL+ OFF’ or ‘CANAL+ ON’. Press the OK button to
change between the two settings.
7 Press the MENU button to confirm the setting and finish.
8 Press the MENU button to finish.
MAIN MENU
Timer Program
PR Preset
VCR Setup
PR+/-:select
OK:confirm MENU:end
PR PRESET
Auto Set
Manual Set
Canal+ Set
PR Erase
PR Align
PR+/-:select
OK:confirm MENU:end
CANAL+ SET
PR+/-:select
:PR view
OK:ON/OFF MENU:end
PR01BBC1 PR08 SKYS
PR02 BBC2 PR09 MTVE
PR03 ITV PR10 P-10
PR04 CHA4 PR11 P-11
PR05 SKY1 PR12 ----
PR06 SKYN PR13 ----
PR07 SKYM PR14 ----
CANAL+ ON
Tips for using a decoder
• When you have connected your television and video recorder by scart, and set the second scart
socket for a decoder, you can select the source you want to decode.
1 If you press the TV/VCR button. ‘ VCR’ will appear in the video recorder display, and the
video recorder tuner signal will be decoded. You can record the decoded video recorder signal.
2 If you press the TV/VCR button. ‘ VCR’ will disappear from the video recorder display, and the
signal input to the EURO AV1 scart socket will be decoded. Normally this will be the signal from
the tuner in the television. You can record the decoded television signal.
• Normally the decoded programme will appear on the television as soon as the decoder is
switched on, as long as you have connected the television through the EURO AV1 scart socket.
• When you connect the decoder by scart and the television by its aerial socket, you have to press
the TV/VCR button to make ‘VCR’ appear in the video recorder display, otherwise you cannot see
the decoded signal.