background image

Index search

At the beginning of each recording, the video recorder marks the
cassette with an index mark. You can search for these index
marks on a cassette.

Press the INDEX + button to find later index marks (FF shows
forward searching) or the INDEX - button to find earlier index
marks (REW shows backward searching).

Once the video recorder finds the index mark it will play for
about five seconds then search for the next index mark. Press
the 

(play) button to return to normal playback.

Tracking and picture quality

Normally while a cassette is playing, the video recorder automatically adjusts the video
heads until they accurately track the original recording. This gives you the best picture.

If you still get picture interference when you are playing a cassette, hold the PR+ or
the PR-button to try and reduce the interference. 

• If horizontal lines or grain still affects the picture, you either have a poor-quality video

cassette or your video heads need cleaning. Normally they will clean themselves if you
play back a good-quality video cassette for half an hour.  If this does not work, you can
either buy a head-cleaning cassette, or take your video to your nearest Comet after-sales
service for cleaning.

25

FF  SP                    
INDEX  01

0:11:09

Direction

Tape positon

Number of

index marks

found

The index search

on-screen display

video cassettes

P l a y i n g

Содержание PROline VN2000











































Отзывы: