Montageanleitung /
Installation manual
MBN GmbH
Balthasar-Schaller-Str. 3
86316 Friedberg
Germany
www.proled.com
45
CALENDAR START-STOP
Program start and stop can be programmed to a different weekday and time. If the
program has at least one day selected in the calendar menu, then on the program
button in the main window a calendar icon will be displayed.
The calendar function can be connected with USM module contact feature. It means
that the program is running only if the actual date and time between the calendar
start-stop time and for the program selected contact sensor also active (closed).
Example:
Objective:
Company logo on the building with built in LED-s. We want to switch on the LED-s
when night is falling (it is in summer later, in winter earlier), and switch off at 22:00.
Switch on again at 4:00 in the morning, and switch off if dawn.
Solution:
We must prepare two programs on the zone which controls the LOGO’s LED.
The first program calendar settings should be: start: 17:00, stop: 22:00, all day
signed,
“Active state: calendar AND switch contact” acitvated.
The second program calendar settings should be: start 4:00, stop: 8:00, all day
signed, “Active state: calendar AND switch contact” activated.
One twilight switch must be connected to USM module in one of the contact sensor
terminals. On the next SENSOR MODULE chapter tell how should do it.
If one program ordered to calendar function, then on the right upper side a small ‘C’
can be see. C means calendar function
