Montageanleitung /
Installation manual
MBN GmbH
Balthasar-Schaller-Str. 3
86316 Friedberg
Germany
www.proled.com
34
CUSTOMIZE
Some parameters can be set in this menu about the appearance of the program
window.
ZONE NAME
visible
– switch on and off the visibility of zone names
DMX OUTPUT WINDOW
visible
– the actual RGB color on the DMX output
can be seen in every zone. This window can be switched on and off
DMX VALUE
visible
– the current RGB values can be seen in every zone. The
visibility of the values can be switched on and off
ENABLE PROGRAM PARAMETER CHANGES
– By touching the
ADD
PROGRAM
button you can add a new program to the zones. This button
visibility can be switched on and off.
PROGRAM BUTTON
size
– The button size in the program window is
variable. If one zone has only one button then there is more space in the zone
area and the button can also be bigger. If you add more buttons, space will be
smaller and the button size will be reduced automatically.
MASTER SLIDER
visible
– for every zone it is possible to set a master value.
This value will reduce the RGB output color if less than 100%. This master
slider can be switched on and off.
IMC DEVICE SELECTION IN FOOTER LINE
– Device names will be visible
on program window footer page and it is possible to activate them here.
‘+’ AND ‘-‘ BUTTONS FOR MANUAL SLIDERS
–For precise setting of master
value possible to switch on ADD +1 and ADD -1 buttons. It will appear above
and under muster sliders
CANCEL
– the window closes without any changes in memory
OK
– the window closes and the software will save all modification
