Montageanleitung /
Installation manual
MBN GmbH
Balthasar-Schaller-Str. 3
86316 Friedberg
Germany
www.proled.com
37
Select the right type in every zone and set the DMX address by touching ‘+’ and ‘-’
buttons. A DMX value override is not possible, because the software always checks
the selected light types as well as the selected DMX start addresses and
automatically skips the reserved channels.
REMOTE DEVICE MANAGEMENT
Handles RDM compliant DMX devices.
COMMUNICATION SETTINGS
This menu handles several TSC controllers in a network. If only one TSC is used, the
network communication can be disabled.
DMX/RDM transmit
– DMX output switch on and off (if switched off then no
DMX signal will send on the output)
RDM sensor check
– RDM communication switch on and off (if switched off
the DMX signal will send to the output, but without RDM packages)
If the network is disabled, software update and data copy from PC via MBN USB
DMX Interface is still possible. Only the communication between TSC modules is
deactivated.
Network enable
– enable and disable the communication between the TSC
modules
Unique network name
– simplifies the identification of other TSC modules, if
they are used in network mode. Touch the end of the text field to edit the
name. Enter the text with the on-screen keyboard:
