Progress PCD46100X, Руководство пользователя

Страница: 39 / 44

To clean the appliance, remove the shelf
supports.
1. Pull carefully the supports up and out of
the front catch.
1
2
3
2. Pull the front end of the shelf support
away from the side wall.
3. Pull the supports out of the rear catch.
Install the shelf supports in the opposite
sequence.
Steam cleaning
You can use the End function to
delay the start of the cleaning.
Refer to "Setting the END".
Remove the worst of the dirt manually.
1. Put approximately 250 ml of water and
3 tablespoons of vinegar directly into
the steam generator.
2. Set the Steam Cleaning function. Refer
to "Oven functions".
The display shows the duration and the
default temperature.
3. Touch to start the cleaning.
An acoustic signal sounds when the steam
cleaning is completed. Touch a sensor field
to stop the signal.
4. Wipe out the appliance with a soft cloth.
Remove the water from the steam
generator with the sponge and rub it
dry.
Keep the door open for approximately 1
hour to let the appliance dry fully.
Steam generation system
CAUTION! Dry the steam
generator after each use.
Remove the water with the
sponge.
Remove the limescale with
water and vinegar.
CAUTION! Chemical de-scaling
agents can cause damage to
the enamel. Follow the
instructions of the manufacturer.
1. To clean the water drawer and the
steam generator, put the water and
vinegar mixture (approximately 250 ml)
through the water drawer into the
steam generator. Wait for approximately
10 minutes.
2. Remove the water and vinegar with the
sponge.
3. Put clean water (100 - 200 ml) into the
water drawer to flush the steam
generation system.
4. Remove the water from the steam
generator with the sponge and rub it
dry.
5. Keep the door open to let the appliance
dry fully.
Removing and installing the
door
You can remove the door and the internal
glass panels to clean it. The number of
glass panels is different for different models.
WARNING! Be careful when
you remove the door from the
appliance. The door is heavy.
1. Open the door fully.
2. Fully press the clamping levers (A) on
the two door hinges.
Progress 39