Mototronik 33
17.4 Removable ballasts
Present on both sides of the device, it increases the weight of the drive wheel to increase traction. Especially useful when driving uphill.
(
1
) To mount the ballast, place the support
A
with the part without opening (the part with the opening must be at the bottom) in the hooks of the support
B
, and swing it down until hooked: the
C
button must be
raised.
Make sure the ballast is safely attached by shaking it.
(2)
To remove it, press the
C
button, swing the ballast upwards and pull it off.
Ballast weight: 2.2 kg each.
DO NOT use a ballast only on one side; in fact, this would unbalance the
steering and could result in loss of control of the vehicle.
Before detaching the motor unit from the wheelchair, it is recommended to
remove both ballasts to avoid dropping the device.
2
A
B
C
C
1
