Mototronik 16
11
COUPLING AND REMOVING THE DEVICE
The MOTOTRONIK system is composed of three main units:
(
1
) motor unit (removable)
(
2
) connection frame (removable)
(
3
) clamps (fixed to the frame)
The pictures refer to a MOTOTRONIK 12" STANDARD and they are to be considered valid for other models, too.
The reported instructions are intended for a user with good trunk control, good upper-limb control and no control of the lower limbs.
The better the body control, the easier the process will be. On the other hand, the user may not find this process to be easy to carry out and, solely for the coupling and removing process, the help of an assistant
may be necessary.
The coupling and removing operation must always be carried out with the system
switched off (
see chapter 14.3
). Failure to comply with this warning may result in
damages or injuries for which Rehateam s.r.l. cannot be held responsible.
Throughout the coupling and removing phase, position yourself in a flat area,
away from any rough/uneven ground and far from personal safety hazards.
Where you find this symbol on the device, pay attention not to pinch/squeeze
your hands/fingers.
3
1
2
