33
Right click the
Volume Up Arrow
. In the pop-up, highlight and left click
Punch Key’s
Commands
to make the
volume up
command available to
all sources
.
5. Next, left click the
Volume Knob Down Arrow
. Double left click
Zone 2 Volume Down
in the
CMD M4/M6 Cmds List
. The Zone 2 Volume Down Command will appear in
the
Button Properties Window
. Right click the
Volume Down Arrow
. In the pop-up,
highlight and left click
Punch Key’s Commands
to make the
volume down
command
available to
all sources
.
Mute
6. Next is the Mute Button. The Volume Knob can be pushed in to execute a programmed
command or macro. It is recommended that the Knob press function be used for Zone
Mute. For this example, M4/M6 pre-amp zone mute will be used.
Figure 28
Placing The Zone/Whole/House Mute Command
Right click the inside section of the
Volume Knob
. In the popup, if not already checked,
highlight and left click the
Mute (Preamp) Key
as shown in
Figure 28
. This will configure
the key for
Zone
and
Whole House Mute
and punch the commands to all banks. The key
will highlight green to indicate special whole-house functionality.
When this button is pressed for less than 2 seconds, the zone will mute. When it is
pressed again for less than 2 seconds, it will un-mute. When the Mute Key is pressed for
longer than 2 seconds, this initiates whole-house muting (all zones mute). When pressed
again for longer than 2 seconds, all zones are un-muted.
Power
7. Right click the
Source Keypad Power Button
. In the pop-up, if not already checked,
highlight and left click
Zone Power Off Key
as shown in
Figure 29
. This will configure the
key for
Zone
and
Whole House Off
and punch the commands to all banks. The key will
highlight green to indicate special whole-house functionality.
When the
Power Key
is pressed for
less than 2 seconds
, the
local zone will turn off
, and
typically, the common sources will stay on until the last zone is turned off. Additionally,
when the Power Key is pressed for
longer than 2 seconds
, this initiates
whole house
power off
(all zones will turn off) and this action will typically also turn off the common
sources.
PROgRAMMINg
