Proficient the source Скачать руководство пользователя страница 22

Страница: 22 / 44

PROgRAMMINg

PROGRAMMING WITH PROFICIENT EDITOR

The Proficient Editor programming instructions provided with the Source are intended to pro-

vide direction for adding a Source Keypad, multiple Source Keypads, Source Dock(s) and Source

Dock Adapter(s), to Proficient M4 and M6 Systems. If configuring a new system, start with the

“

Programming With Proficient Editor”

section of the

Proficient Editor Advanced Programming

Guide

for system configuration, source setup, power management, etc. Use this manual for

configuration and programming zones using Source Keypads.

Note: If only changing PMKs to Source Keypads, and not adding iPod/Source Dock/Source

Dock Adapter, follow the directions in

Download Proficient Editor

and proceed to the “

Adding

a Source Keypad to an Existing M4/M6 Project”

section.

With the system installed at the job site or set up for test at the shop, the system is ready for

programming. Connect the 3.5mm Plug Transfer Cable between the Control Port on the M4

or M6 and the Com Port on a PC running Proficient Editor (or the USB Port with the USB/Serial

Adapter). Power up the M4 or M6 and proceed as follows:

DOWNLOAD PROFICIENT EDITOR

Before programming with Proficient Editor, always check www.proficientaudio.com to verify

that the version of Proficient Editor being used is the latest rev.

QUICK START GUIDE FOR SIMPLE SOURCE PROFICIENT EDITOR PROGRAMMING

Follow the instructions in this section if no source or zone changes other than replacing a PMK

with the Source are required.

Open

an existing Project.

2. Under

Project Content/Zone Setup

, left click the zone the Source Keypad is going to be

added to.

3. In the

Zone Setup Window

, left click

Name/Sources

. If the

Available Sources

are

checked and not going to change, left click

Apply

. Check or uncheck any boxes to make

changes as needed.

4. In the

Zone Setup Window

, left click

Keypad

5. Under

Graphic Keypad

, left click to place a check mark in the box next to the Source. If

removing the PMK left click the PMK-1x box to uncheck the box and remove the PMK

from the zone. Left click Apply.

6. In the

Zone Setup Window

, left click

Whole House /Mute

7. If the

Whole House/Party Mode

and

Mute Key Functionality

settings are not going to

change, left click

Apply

, otherwise make desired changes and then left click

Apply

. See

the

“Whole House/Mute”

section for additional information.

8. Right click the Source icon in the zone being configured, then left click “The Source

Setup”. In the

Zone # The Source Window

, left click the appropriate Address Box to set

Содержание the source













































Результаты поиска

Содержание the source

Отзывы:

Бренды по названию

Популярные бренды

Proficient the source, Инструкция по установке и программированию

Результаты поиска

Содержание the source

Отзывы:

Бренды по названию

Популярные бренды