PROEL KDC1905, Руководство пользователя

Страница: 32 / 64

4.11.1 Quick configuration of the locking mechanism
From version 7r75 onwards, the software enables quick configuration of lock parameters (lock type and its voltage) .
Configurator is launched by program A-0, subprogram 98. Using a single entry, the cassette sets the parameters:

400 (filling PWM of lock at idle)

401 (filling PWM of lock at first phase)

402 (filling PWM of lock at second phase)

403 (filling PWM of lock at third phase)
Lock configurations are entered using a four-digit number. The following digits are described below:
• first digit → keyboard number (0 – global setting)
• second digit → type of locking (0 – regular, 1 – reverse)
• third and fourth digits → filling in (as a percentage) (see point 7.4.1)
Examples of prepared numbers:
-
0050 – global setting, normal locking, filling 50% in the second phase of control
- 0170 – global setting, reverse locking, filling 70% at idle
- 5080 – local setting for keyboard 5, normal locking, 80% filling in the second phase of control
- 5000 – deletion of local PWM settings of the lock for keyboard no. 5