PROEL KDC1905, Руководство пользователя, Страница: 42 / 64

Table 23: Technical parameters of the lock
7.5 Table of codes
Code tables are used to quickly assign lock codes for all physical numbers. Table of codes in KDC1905 is
compatible with code tables from CD1803 systems – lock codes are generated based on the year and table number.
Change of code table parameters can be modified by appropriate parameters and does not require manufacturer ’s
intervention.
Change of codes is carried out by editing two parameters: year of the code table (parameter no. 209) and table
number (parameter no. 208).
Table 24: Code table parameters
It is possible to set the lock code for the property independently. If this code is set manually, it takes preced ence
over the code from table. Individual lock codes are set in program A-3 (see point 4.4). Unlike the code table, codes
entered in program A-3 are assigned to logical numbers.
Note!
For technical reasons, the CD1803 control panels had 2001 code tables uploaded at the factory in 2002. In
case of installing the KDC1905 system, instead of the old system for control panels manufactured in 2002, make
sure that the code table is available every year. Entering a different year will result in the change of all lock codes.
Parameter name
Number Symbol Scope
filling PWM of lock at idle
filling PWM of lock, phase 1
filling PWM of lock, phase 2
filling PWM of lock, phase 3
first phase time of locking control
third phase time of locking control
Number Symbol Scope
Code table number
Code table year
Parameter name