Prodys S.L. Tel: +34 91 6896880
Fax: +34 91 6943777
Email:
Web:
www.prodys.com
Page 68
Enable Control Port
(by default enabled
8
)
Program Port
(53000 by default for PROGRAM channel
9
)
Talkback Port
(53001 by default for TALKBACK channel
10
)
Timeout
(the connection timeout is 15s by default
11
)
Picture 65. Streaming Protocol Menu. BRAVE
When MPEG-TS protocol is selected (only in Ethernet mode), this menu is used
to set some MPEG-TS parameters. These parameters are:
Speed of the Transport Stream.
Local port. Its default value is 1234.
Transport Stream ID.
PMT PID.
Video PID.
Audio1 PID.
8
Disabling the <Control Port>, means disabling the TCP protocol. Therefore any streaming
connection should be request from both parties to meet the communication.
9
Usually this number is more important for the receiving Ikusnet since the local router must
provide “port forward” on this port number for the Ikusnet. This port must be “forwarded” for TCP
& UDP. Please contact your IT specialist or network manager for details about this procedure.
10
Preceding remark is applicable for the Talkback channel too.
11
This parameter applies for the detection of interrupted streaming connections. After a
streaming connection has been involuntary interrupted, Ikusnet retries indefinitely re-connections
to the destination.
