Seite 28
The application process can be
interrupted by pressing the „Pause“
button.
The drawing process continues
when the „Draw“ button is pressed again.
7.1.5 Select layout
The layout indicator shows the name of the currently selected layout. A layout is a
renameable memory slot storing a drawing speed and a drawing length. This is
especially useful for recurring tasks where the same speed and length are required.
The current layout can be selected by tapping the layout field.
7.1.6 Setting the drawing speed
The drawing speed can be set by tapping the Speed field. A slider will appear on
the right side of the screen to change the value. The value can also be changed by
using the
and
buttons.
The adjusted value of the drawing speed will automatically be saved in the currently
selected layout.
7.1.7 Setting the drawing length
The drawing length can be set by tapping the Length field. A slider will appear on
the right side of the touch screen to change the value. The value can also be
changed by using the
and
button.
The adjusted value of the drawing length will automatically be saved in the currently
selected layout.
If the drawing area is defined through the manual stops (1 and 2), the
drawing length should be set to a high value, e.g. 400 mm. The drawing
process will no longer be defined by the set length and will automatically
stop when it reaches one of the stops.
