Seite 20
5.3 Shutdown
Turn off the device by pressing the power button (10). The display will turn off and
the device is powered down. Before removing the power cable, turn off the main
switch (15).
6
Application
6.1 Preparation
Before the apparatus is prepared for application, you should have decided:
•
which type of applicator you will be using
•
which substrate you will be using
•
which base plate you will be using
-
glass plate
-
precision-vacuumplate
-
heatable precision-vacuumplate (only versions with special isolation plate)
-
heating plate (only versions with special isolation plate) or
If using a wire-bar or profile rod, use the printing blanket side of the glass plate. For
other applicators, use the glass plate with the glass surface up (see chapter 8
”Changing the heating plate” on page 35).
Depending on the coating material used, the test may only be carried out in
a ventilated environment.
Heating of substances can lead to risks of explosion, implosion or the
release of toxic or flammable gases. If heating of a product can lead to the
release of hazardous substances, it is necessary to use an appropriate
extraction system.
During operation, the distance to walls and other objects must be at least 10
cm.
