pro.point 8843740, Инструкция по эксплуатации

Страница: 10 / 40

8843740 1/4 in. Air Riveter V1.0
10 For technical questions call 1-800-665-8685
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient,
easier to control and will have fewer problems.
2. Inspect the tool fittings, alignment, hoses and power supply cord
periodically. Have damaged or worn components repaired or
replaced by an authorized technician. Only use identical
replacement parts when servicing.
3. Follow instructions for lubricating and changing accessories.
4. Only use accessories intended for use with this tool.
5. Keep the tool handles clean, dry and free from oil/grease at all
times.
6. Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the
user and/or others.
ADDING HYDRAULIC OIL
NOTICE! Do not overfill the air cylinder (H) with
hydraulic oil. This can impair the tool’s function.
1. Disconnect the air hose from the riveter.
2. Invert the tool and place the tool in a vise to free
up both hands.
3. Remove the cylinder base.
4. Unscrew the air cylinder cover (#5) by turning
the nut counterclockwise and then lifting the
cover and piston assembly away from the
cylinder (Fig. 3).
5. The hydraulic oil level should barely cover the lock
nut (#8) connecting the air cylinder to the oil rod
(#23). Add hydraulic oil until the level is just above
the connection (Fig. 4-1).
6. Lightly lubricate the inner wall of the air cylinder.
Fig. 3
Fig. 4
4-1