pro.point 8843740, Инструкция по эксплуатации

Страница: 3 / 40

V1.0 1/4 in. Air Riveter 8843740
Visit www.princessauto.com for more information 3
INTRODUCTION
The 1/4 in. Air Riveter is ideal for installing 1/8 to 1/4 in. long blind
rivets. The air riveter can use either steel or aluminum rivets. The air
riveter holds the ejected pins into a clear safety cap for later disposal.
SAFETY
WARNING! Read and understand all instructions before using this
tool. The operator must follow basic precautions to reduce the
risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or
inspection and maintenance instructions.
WORK AREA
1. Operate in a safe work environment. Keep your work area clean,
well-lit and free of distractions. Place lights so you are not working
in a shadow.
2. Keep anyone not wearing the appropriate safety equipment away
from the work area.
3. Store unused tools properly in a safe and dry location to prevent
rust or damage. Lock tools away and keep out of the reach of
children.
4. Do not install or use in the presence of flammable gases, dust or
liquids.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National
Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1. Always wear impact safety goggles that provide front and side
protection for the eyes. Eye protection equipment should comply
with CSA Z94.3-07 or ANSI Z87.1 standards based on the type of
work performed.
2. Wear gloves that provide protection based on the work materials or
to reduce the effects of tool vibration.
3. Wear protective clothing designed for the work environment and tool.