pro.point 8843740, Инструкция по эксплуатации

Страница: 15 / 40

V1.0 1/4 in. Air Riveter 8843740
Visit www.princessauto.com for more information 15
PROBLEM(S) POSSIBLE CAUSE(S) SUGGESTED SOLUTION(S)
The riveter has
weak pulling
action. 1. Low air pressure.
2. Inadequately sized
compressor.
3. Damaged air
compressor.
4. The riveter is low on
hydraulic oil.
1. Check the regulator to verify
that it is set to 90 PSI.
2. Upgrade to a suitable
compressor of adequate
capability.
3. Have the compressor
serviced by a qualified
service centre.
4. Top up the hydraulic oil
reservoir and prime the
riveter.
Leaking air.
1. There are poor hose
connections in the
system.
2. Damaged O-ring.
3. Dirty air valve or air
inlet.
1. Reconnect the air system
using thread sealant tape on
the fittings.
2. Replace the O-ring.
3. Clean and lubricate with
pneumatic tool oil.