Fabric
For all fabrics use dry cleaning fluid only.
Corrosion Protection
If you moor your Pro-Line in salt water for extended periods make sure to check the anti-
corrosion anode often for operation. Your motor / drive unit has a sacrificial anode to mitigate
the effects of corrosion causing, electrolysis. Maintain this anode in accordance with the
maintenance schedule in your engine manual. Make sure the anode surface is exposed and not
caked with corrosion and scale. If the anode is eroded replace it.
Winterization and Storage
Pre-Storage Check List
Remove drain plug, keep bow high to drain any water accumulation.
Run a pint of RV antifreeze through bilge pump.
Drain all water from water systems and head.
Fill fuel tanks and add a stabilizer such as 'STA-BIL' to the gasoline.
Prepare the engine in accordance with manufactures recommendations found in
your engine manual.
Treat metal parts with rust inhibitor.
Remove the battery and protect from freezing. Trickle charge overnight once a
month.
Place under cover.
Fitting Out After Storage
Check entire fuel system for loose fittings, leaks and damage.
Clean battery terminals, install battery(s), and coat terminals with a deoxidizing
agent.
Check all through hull fittings and hoses for obstructions, leaks, tightness and
condition.
Test navigation, anchor and other lights for operation.
Check wiring, terminal blocks and plugs for loose connections and corrosion.
Verify switch and equipment operation.
Check the condition of anchor lines, anchor and rode.
Install the hull’s drain plug and clean out any debris from bilge and cockpit.
Remove antifreeze and flush water system.
