Switches
Windlass
Refer to the windlass manual for operation of the windlass. The Windlass is protected by a 30A
breaker located next to the windlass switch mounted on the console.
Bilge Pump
Your Pro-Line is equipped with an automatic bilge pump system with a manual override. The
pump is located at the aft end of the bilge at the keel. The pump is mounted as low as possible. If
the pump runs for a long time it may mean that water is entering the bilge faster than the pump
can expel it. Investigate and correct the cause immediately. The automatic float switch is wired
directly to the battery terminal or battery selector switch through an in-line fuse. Keep the bilge
area clean and free from debris that could clog the bulge pump ports. The helm switch overrides
