Pro-face PL-5900 Series, Руководство пользователя

Страница: 70 / 145

Chapter 5 - System Setup
5-13
PL-5900 Series User Manual
ACPI funcion Disabled
Video Off Option Susp,Stby -> Off
Video Off Method V/H SYNC+Blank
Power Button Over Ride Instant Off
Watchdog Function Disabled
x Watchdog Timer (sec) 5
PM Wake Up Events Press Enter
↑↓→← :
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
Power Management Setup
Item Help
Menu Level
Select Power Management Setup from the Main Menu and the following screen
will appear.
5.2.7 Power Management Setup
„ „ „ „ „
ACPI Function
This setting enables the ACPI function when ACPI-compatible peripherals are
connected. The available settings are [Enabled] and [Disabled]. The factory
default setting is [Disabled] and is recommended for most users.
„ „
„ „
„
Video Off Option
This setting determines the On/Off condition of the display. The available settings
are [Always On], [Suspend
→
Off], [Susp, Stby
→
Off], and [All Modes
→
Off].
The factory default setting is [Susp, Stby
→
Off] and is recommended for most
users.
„ „ „ „ „
Video Off Method
This setting determines the method to blank the display screen. The available
settings are [Blank Screen], [V/H SYNC+Blank], and [DPMS Supported]. The
[Blank Screen] selection blanks the display. The [V/H SYNC+Blank] blanks the
display and also suspends the Vertical/Horizontal synchronization signal of the
display. The [DPMS Supported] selection controls the operation when a CRT
that supports DPMS is used. The factory default setting is [V/H SYNC+Blank]
and is recommended for most users.
„ „
„ „
„
Power Button Over Ride
When enabled, this feature forces the system to enter the Soft-Off state if the
power button is pushed for more than 4 seconds. The available settings are [Delay
4 sec] and [Instant Off]. The factory default setting is [Instant Off].