manualshive.com logo in svg

Pro-face PL-5900 Series, Руководство пользователя

Поделиться
Скачать
Pro-face PL-5900 Series Скачать руководство пользователя страница 6

Preface

5

PL-5900 Series User Manual

„

   

About the PL's Display Panel

•  The PL's currently displayed data, its voltage and brightness setting each affect

the intensity of 

Contouring

.  (i.e, when some parts of the screen are brighter

than others, creating a wavelike pattern)

•  There are minute grid-points (dark and light) on the Display Panel's surface.

This is part of the PL's design and not a defect.

•  Shadows may appear at the top of the LCD. This is normal for an LCD display.

•  Sometimes the display area may look as if the display colors have changed.

This is a common attribute of LCD's and is not a defect.

•  Displaying a single image for long periods can cause an afterimage to remain

when the display is changed to another screen. To prevent this, periodically turn
the PL OFF and then ON again to remove this afterimage.

Содержание PL-5900 Series


















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды