Pro-face PL-5900 Series, Руководство пользователя

Страница: 27 / 145

Chapter 2 - Specifications
2-10
PL-5900 Series User Manual
2.4 PL Part Names and Features
A: Display
Display output area. The built-in VGA control-
ler supports PC compatible architecture.
B: Touch Panel
This high-resolution analog touch panel allows
you to configure a keyboard-less system.
C: Front Maintenance Cover
Open this cover to access the Keyboard I/F, Reset
Switch and connect the optional FDD unit.
D: Power Lamp LED (POWER)
The status of the lamp changes according to the
alarm type detected by the RAS feature.
2.3.5 RAS Interface
E: Hard Disk Access LED (DISK)
The LED lights during accesses to the hard disk/flash
file disk.
F: FDD Front Face Blank Panel
Remove this cover to install the optional FDD Unit.
G: Keyboard Connector
A PS/2 compatible keyboard is connected here.
H: USB Connector (USB2)
To use the USB connector, you must install Windows
98 (SR2).
I: Hardware Reset Switch (RESET)
J: IDE I/F Cover
To connect the optional CD-ROM drive unit (PL-
DK200), the Mirror Disk Unit(PL-MD200-HU01),
or RS-232C/RS-485 Adapter remove this cover
and use this connector.
K: FDD Rear Face Blank Panel
Remove this cover to install the optional FDD
Unit.
L: Power Switch (POWER)
Turns the PL’s power ON or OFF.
M:Power Terminals
The PL’s AC100V/DC24V power cord terminals
are connected here.
N: Rear Maintenance Cover
Remove this cover to install the optional DIM
module, or an expansion board.
<
I
nside the front maintenance cover
>
C
A B
E D
G H F I
J L K M
N