Pro-face PL-5900 Series, Руководство пользователя

Страница: 62 / 145

Chapter 5 - System Setup
5-5
PL-5900 Series User Manual
„ „ „ „ „
First Boot Device/ Second Boot Device/ Third Boot Device
The selections for the search drive sequence of the operating system. The avail-
able settings are [Floppy], [HDD-0], [CDROM], [HDD-1], and [Disabled]. The
factory default settings are [Floppy] for the [First Boot Device], [HDD-0] for the
[Second Boot Device], and [CDROM] for the [Third Boot Device].
„ „
„ „
„
Boot other Device
This setting determines whether to allow the startup from devices other than those
selected as [First Boot Device], [Second Boot Device], and [Third Boot Device].
The available settings are [Disabled] or [Enabled]. The factory default setting is
[Enabled] and is recommended for most users.
„ „ „ „ „
Swap Floppy Drive
This setting swaps Drive A with Drive B for the recognition. The available
settings are [Disabled] or [Enabled]. The factory default setting is [Disabled] and
is recommended for most users.
„ „
„ „
„
Boot Up Floppy Seek
The setting specifies the function to check whether the floppy disk drive is in-
stalled upon the system boot-up process. The available settings are [Disabled] or
[Enabled]. The factory default setting is [Enabled] and is recommended for most
users.
„ „
„ „ „
Boot Up Numlock Status
This setting specifies the Numlock key status upon the startup. The available
settings are [On] and [Off]. The factory default setting is [On] and is recom-
mended for most users.
„ „
„ „
„
Gate A20 Option
The available settings are [Normal] and [Fast]. When [Normal] is selected, the
Keyboard control will be employed to control Gate A20. When [Fast] is selected,
the Chipset will be employed. The factory default setting is [Fast] and is recom-
mended for most users.
„ „
„ „ „
Typematic Rate Setting
The setting specifies the keyboard speed for the repeat process of the character.
The available settings are [Enabled] and [Disabled]. The factory default setting is
[Disabled] and is recommended for most users.
„ „ „ „ „
Typematic Rate (Chars/ Sec)
This setting specifies the actual typematic rate (repeated character input per
second) when the [Typematic Rate Setting] option is set to [Enabled]. The avail-
able settings are [6], [8], [10], [12], [15], [20], [24], [30]. The factory default
setting is [6] and is recommended for most users.
„ „
„ „ „
Typematic Delay (Msec)
When [Typematic Rate Setting] is set to [Enabled], this setting determines the
delay period until the initial repetition is started. (msec)=millisecond. The avail-
able settings are [250], [500], [750], and [1000]. The [250] selection is factory set.