Pro-face FP5000 Series, Руководство пользователя

Страница: 59 / 95

FP5000 Series User Manual
59
Removing from the Panel
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH

Remove all power from the device before removing any covers or elements of the system, and
prior to installing or removing any accessories, hardware, or cables.

Unplug the power cable from both this product and the power supply.

Always use a properly rated voltage sensing device to confirm power is off.

Replace and secure all covers or elements of the system before applying power to this
product.
Failure to follow these instructions will result in death or serious injury.
NOTICE
EQUIPMENT DAMAGE

Keep this product stabilized in the panel-cut while you are installing or removing the screw
fasteners.

To avoid damage, remove this product while pushing the anti-drop lock or by making sure the
lock does not touch the panel.
Failure to follow these instructions can result in equipment damage.
Step Action
1 Using a Phillips screwdriver, gradually loosen (turn counterclockwise) the
screws for the fasteners (top, bottom, left, and right), alternating diagonally
between screws until all screws are loose.
1 Rear side
NOTE:

For the number of installation fasteners on your model, see Number of
Installation Fasteners in Step 5 of Installing to the Panel
(see page 56)

If the panel is thick (approx. 5 mm [0.2 in]), you may have trouble
straightening the L-shaped part of the installation fastener. If this happens,
push this product from the front as you loosen the screws.