Pro-face FP3900-T41, Руководство пользователя

Страница: 20 / 79

Chapter 1 Introduction
1-3
1.2 Optional Equipment
All optional items listed below are products of Digital Electronics Corporation.
„
Cables
„
Maintenance Parts
„
Related Software
Digital Electronics Corporation’s support site - Otasuke Pro!
http://www.pro-face.com/otasuke/
Product Name Model No. Description
RS-232C Cable FP61V-IS00-O
Serial interface cable (5m) used for touch panel data
transmission between the host and the FP. This is a
straight Dsub9 pin female cable.
USB Cable FP-US00
USB interface cable (5m) used for touch panel data
transmission between the host and the FP. The cable
type is A-B.
Analog RGB Cable FP-CV02-45
Analog RGB interface cable (4.5m) when image signal
is output to the FP from the host. VGA specifications
(Dsub15 pin male). (4.5m)
DVI-D Cable
FP-DV01-50
FP-DV01-100
*1
*1 The FP-DV01-100 can be used only when connected to a PS-2000B unit. When using
the FP-DV01-100, be sure to turn the PS-2000B’s internal dipswitch 4 ON.
(When using the FP-DV01-50, turn this switch OFF.)
Digital Visual Interface cable used to send the image
signal from the host to the FP. XGA specifications (DVI-
D 24-pin male). (5 m or 10 m)
Product Name Model No. Description
Installation Fasteners CA3-ATFALL-01 Metal installation fasteners.
Rubber Gasket CA7-WPG19-01
Replacement rubber gasket, used when installing
the FP. Same as the FP's original gasket.
Screen Protection Sheet CA7-DFS19-01
Disposable and dirt resistant sheet for the FP's
screen. The FP's touch panel can be used with
this cover sheet attached. (5 sheets/set)
Product Name Model No. Description
Mouse Emulator
*1
*1 OS can be Windows NT
®
4.0 SP6A or higher, Windows
®
2000 or Windows
®
XP.
UPDD Mouse Emulator software for the FP
• Visit our support site below and download the mouse emulation software (UPDD).