manualshive.com logo in svg

Pro-face FP3900-T41, Руководство пользователя

Поделиться
Скачать
Pro-face FP3900-T41 Скачать руководство пользователя страница 2

1

Preface

Thank you for purchasing Digital’s TFT type color display panel, the ‘FP-3900T series’  (hereafter referred to as the FP 

unit).

Please read this manual completely to insure the correct use and complete understanding of the FP unit’s functions.  

Product names used in this manual are the trademarks / registered trademarks of their respective owners.

© 2007 Digital Electronics Corporation. All rights reserved.

NOTICE

1.

Copying this manual’s contents, either in whole or in part, is prohibited without the express permission of Digital 

Electronics Corporation, Japan.

2.

The information contained in this manual is subject to change without notice.

3.

If you find any errors or omissions in this document, please contact Digital Electronics Corporation to report your 

findings.

4.

Please be aware that Digital Electronics Corporation shall not be held liable by the user for any damages, losses, 

or third party claims arising from the uses of this product.

Содержание FP3900-T41
















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды