Pro-face AGP-3300 Series, Руководство пользователя

Страница: 54 / 89

Chapter 3 Installation and Wiring
3-13
3.4 CF Card Insertion and Removal
CF Cards can only be used with AGP-3300/3301 Series units.
When using the AGP Unit and a CF Card, observe the following precautions:
„
Inserting the CF Card
Use the following steps to insert the CF Card in the AGP.
(1) Pull the CF Card Cover frontward and then open it upward.
Prior to inserting or removing a CF Card, be sure to turn the AGP unit’s CF Card ACCESS
switch OFF and to confirm that the ACCESS lamp is not lit. If you do not, CF Card internal
data may be damaged or lost.
While a CF Card is being accessed, NEVER turn OFF or reset the AGP, or insert or remove
the CF Card. Prior to performing these operations, create and use a special AGP applica-
tion screen that will prevent access to the CF Card.
Prior to inserting a CF Card, familiarize yourself with the CF Card’s front and rear face ori-
entation, as well as the CF Card connector’s position. If the CF Card is not correctly posi-
tioned when it is inserted into the Multi Unit, the CF Card’s internal data and the AGP unit
may be damaged or broken.
Be sure to use only CF Cards manufactured by the Digital Electronics Corporation. The CF
Card’s internal data may be damaged when using another manufacturer’s CF Card.
Once AGP data is lost, it cannot be recovered. Since accidental data loss can occur at any
time, be sure to back up all AGP screen and CF Card data regularly.
Be sure to follow the instructions given below to prevent the CF Card’s internal data from
being destroyed or a CF Card malfunction from occurring:
• DO NOT bend the CF Card.
• DO NOT drop or strike the CF Card against another object.
• Keep the CF Card dry.
• DO NOT touch the CF Card connectors.
• DO NOT disassemble or modify the CF Card.