Chapter 6 Maintenance
6-3
(3)
Attach the new gasket to the AGP. Be sure to insert the gasket into the AGP’s groove so that the gasket’s
groove sides are vertical.
(4)
Check that the gasket is attached correctly to the AGP.
• The gasket must be inserted correctly into the groove for the AGP’s moisture
resistance to be equivalent to IP65f.
• Be sure the gasket’s seam is not inserted into any of the unit’s corners, only in the
straight sections of the groove. Inserting it into a corner may lead to its eventually
tearing.
• The upper surface of the gasket should protrude approximately 2 mm out from
the groove. Be sure to check that the gasket is correctly inserted before installing
the AGP into a panel.
• To ensure stable resistance against dust and moisture, insert the gasket so that
the seam is at the bottom of the AGP unit.
2.0 [0.08]
Unit:mm [in.]
Seam
Содержание AGP-3300 Series
