Pro-face AGP-3300 Series, Руководство пользователя

Страница: 43 / 89

AGP-3300 Series User Manual
3-2
3.1 Installation
3.1.1 Installation Procedures
Follow the steps given below when installing the AGP.
„
Check the Installation Gasket’s Seating
It is strongly recommended that you use the installation gasket, since it absorbs vibration in addition to repel-
ling water.
Place the AGP on a level surface with the display panel facing downward. Check that the AGP’s installation
gasket is seated securely into the gasket’s groove, which runs around the perimeter of the panel’s frame.
For the procedure for attaching the installation gasket, refer to "6.1.2 Installation Gasket Check/Replace-
ment."
SEE
6.1.2 Installation Gasket Check/Replacement (page6-2)
• Before installing the AGP into a cabinet or panel, check that the installation gas-
ket is securely attached to the unit.
• A gasket which has been used for a long period of time may have scratches or
dirt on it, and could have lost much of its dust and drip resistance. Be sure to
change the gasket periodically (or when scratches or dirt become visible).
• Be sure the gasket used is model CA3-WPG6-01.
• Be sure the gasket’s seam is not inserted into any of the unit’s corners, only in the
straight sections of the groove. Inserting it into a corner may lead to its eventually
tearing.