Pro-Fab Industries Empyre Elite 100, Инструкция по установке и эксплуатации

Страница: 5 / 32

EmpyrE ElItE InstallatIOn and OpEratIOn manual 3
InTroduCTIon
the Empyre Elite Hot Water Furnace
You have selected one of the best wood stoves/furnaces
on the market today! It has been specially designed to
produce highly efficient heat with emissions well below
environmental standards, and we are proud to offer a 10
year limited warranty!
To ensure maximum benefit from your new Empyre Elite
furnace, read the Installation and Operation Instruction
Manual cover to cover and follow all instructions carefully.
The Empyre Elite furnace has been designed for indoor
installation and has also been tested to meet UL Standard
391 - 2006 Standard C22.2 No.3 and CSA B366-1-M91 for
indoor central solid fuel fired furnaces.
Please keep this manual for future reference.
How the Empyre Elite Works
The Empyre Elite uses a process called wood gasification
to produce highly efficient combustion in the furnace’s dual
burn chambers. (1) Wood in the firebox burns from the
bottom up, drying the top layer of wood in the firebox and
forcing gases and exhaust into the lower burn chamber. (2)
In the brick-lined lower chamber, these volatile gases are
burned at temperatures as high as 2000°F (1093°C).*
The fire brick lining in both burn chambers absorbs the heat
and maintains burn chamber temperatures for consistent
gas combustion. This high-temperature gas combustion
significantly lowers emissions, prevents creosote buildup,
and minimizes ash buildup in the unit. (3) After passing
through the burn chamber, exhaust air escapes through
multiple flues running through the water jacket, heating
the water quickly and efficiently. (4) The exhaust cools as it
passes through the flues, and when it leaves the chimney,
temperatures have fallen to 350°F (177°C).
*varies based on fuel type, burn rate and other conditions
Read more on gasification on page 17.
MODEL Empyre Elite 100
1
2
3
4