60
Date:
20-11-2014
Data name:
esc300-2-v12a_EN
ESC300 (swv-1.06)
Author:
Heiko Lange
Pages:
72
© P. Prinzing GmbH - 89173 Lonsee-Urspring (Germany)
Service: +49 (0) 7336 - 961018
* Option / depends on design
Service
8.8. Batteries on the remote - care and replacement
The power supply of the remote happens by 4 rechargeable batteries of the type:
AA HR6 NiMH
(min. 2200 mA/h)
When it is completely load, the remote has got a capacity of approx. 24 h. The ca-
pacity of the batteries depends on the charging condition, ambient temperature, use
and the age. You should load the remote regularly in the charging station, minimum
once a day, completely (min. 6 hours) . The current capacity of the batteries will be
shown on the display (fi g: 60/1).
If the capacity is sinking very fast, even the remote was fully load, you have to
change the batteries.
ATTENTION
Use only rechargeable batteries which are stated in
the technical data.
If using unsuitable batteries, there might be the danger
of fi re or explosion!
Change the batteries on the remote:
1. Open the battery case on the backside of the control
Loosen therefor the fastening screws on the case am (60/2)
2. Extract all batteries out of the battery case
3. Insert 4 new batteries into the battery case
ATTENTION! Consider the polarity!
4. Close the battery case on the backside of the remote
Retighten the fastening screws.
5. Charge the new batteries completely on the charging station
INFO
Batteries do not belong in household waste!
60/1
Capacity display - of the batteries in the
remote display
60/2
Battery case - with fastening screws
