38
Date:
20-11-2014
Data name:
esc300-2-v12a_EN
ESC300 (swv-1.06)
Author:
Heiko Lange
Pages:
72
© P. Prinzing GmbH - 89173 Lonsee-Urspring (Germany)
Service: +49 (0) 7336 - 961018
* Option / depends on design
Extended functions
6.3.1 Set the parameters for the frost mode
You can set the parameters for the frost mode in the menu „main settings“. These parameters apply for all alleys.
TIP
For a linear adaption of the interval time corresponding the temperature chose in „interval
time ((
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
) “a longer time and at „interval time ((
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
)“ a shorter time,
If you want to have interval times which are independent of the temperature, chose for both
parameters „interval time“ the same value.
Set the parameters for the frost mode:
1. Chose in the main menu „main settings“
Use the arrow buttons up/down fro the selection
2. Chose in the menu main settings „frost mode“
Use the arrow buttons up/down fro the selection
3. Press
ENTER
( ) to open the menu item „frost mode“
4. Chose a parameter (switch on temperature, interval time, or similar)
Use the arrow buttons up/down fro the selection
5. Press
ENTER
( ) to edit the chosen parameter
6. Press the
ARROW BUTTONS
( //
/
/
) to change the value of the parameter
7. Press
ENTER
( ) to save the changes
8. Chose another parameter (point 4.) or end the setting
9. Press
ESC
to leave the menu
Press ESC till the operation mode will be displayed, or navigate to another menu
item.
38/1
Menu „main settings“ chose „frost mode“
38/2
Menu „frost mode“ Parameters for the
frost mode
