43
Date:
20-11-2014
Data name:
esc300-2-v12a_EN
ESC300 (swv-1.06)
Author:
Heiko Lange
Pages:
72
© P. Prinzing GmbH - 89173 Lonsee-Urspring (Germany)
* Option / depends on design
Service: +49 (0) 7336 - 961018
Operation with the ESC300
7.
Operation with the ESC300
Before you start the operation with the control ESC300 you have to assure the following points.
- The system is completely mounted incl. all safety arrangements.
- The system was set up corresponding all legal statutory and operational provisions.
- The control was commissioned according to the rules (main settings, learning program).
- The operator of the control knows the dung removal system and knows about the functions and the operator buttons.
- The operator knows about the danger which may lead from the dung removal system.
Before operating with the control the commissioning must be performed (chapter 5)!
7.1. Manual operation with the electronic control ESC300
By the operator buttons on the remote ESC300 you can start the scraper manual.
For the manual operation, the operation mode must be displayed (43/1.)
Functions for the manual operation:
Chose one alley:
Press the
ARROW BUTTONS
( / ) to select one alley.
The chosen alley will be displayed.
Chose a program:
Press the
ARROW BUTTONS
( / ) to select a program.
The chosen program will be displayed.
Scraper move manual forward:
Press the button
FORWARD
( ) to move the scraper ahead.
The scraper moves up to the next stop, obstacle or till the button STOP was
pressed.
Scraper move manual backward:
Press the button
BACKWARD
( ) to move the scraper back.
The scraper moves up to the next stop, obstacle or till the button STOP was
pressed.
Start a program sequence manual (scraper in home position!!!):
Press the button
START
(
) to start the displayed program.
The scraper moves corresponding the parameters which were set in the program.
Interrupt scraper move (pause) or end (stop):
With the buttons forward/backward for manual scraper move.
Press
1x
the
STOP
button ( ) >>> the scraper move ends
For automatic scraper move (program sequence) with button start.
Press
1x
the
STOP
button ( ) >>>the scraper will be interrupted (pause)
Press
2x
the
STOP
button ( ) >>> the scraper move ends
43/1
Display operation mode
(1) - display current program
(2) - display chosen alley
43/2
„Remote“ - Operator buttons for the
scraper move
