Printronix PrintNet P8000 Line, Руководство пользователя

Страница: 182 / 240

Chapter 12
Complete Command List
182
store ptrmgmt status <STATUS PORT NUMBER>
Example:
store ptrmgmt status 1025
Receives printer status, print job status, and/or emulation
verification data. The data sent through this port is defined by
the printer code.
Default: 9002
store ptrmgmt mgmt <MGMT PORT NUMBER>
Used in PXML operation.
Default: 9007
store tcpip <IFNUM> addr <ADDRESS>
Example:
store tcpip 1 addr 192.75.11.9
Store the IP address for the PrintNet.
store tcpip <IFNUM> mask <MASK>
Example:
store tcpip 1 mask 255.255.255.0
Store the subnet mask for the PrintNet.
store tcpip <IFNUM> opts [[-]rarp] [[-]bootp] [[-]dhcp]
[[-]persistdhcp]
Example:
store tcpip 1 opts -bootp -dhcp
Enable or disable the automatic RARP, BOOTP, DHCP, or
persistent DHCP requests for IP addresses upon bootup. If you
are storing the PrintNet TCP/IP network settings within the
device, you will not need to rely on BOOTP or DHCP for new
settings.
store tcpip route add default[1|2] <ROUTER> <IFNUM>
[<METRIC>]
Example:
store tcpip route add default1 192.75.11.1 1
Store a default router/gateway defined by router IP Address
(<router> <ifnum>) so the PrintNet knows where to direct
packets destined for another subnet. It is easier to store one
default entry rather than an entry per remote host or network as
in the previous command.
store tcpip del default [1|2]
Example:
store tcpip route del default1 192.75.11.1 1
Delete a default router/gateway defined by router IP Address
(<router> <ifnum>) so the PrintNet knows where to direct
packets destined for another subnet.