Printronix PrintNet P8000 Line, Руководство пользователя

Страница: 200 / 240

Chapter 12
Complete Command List
200
load [default]
Load the settings stored in flash memory and use them as the
current or working settings. If
default
is specified as well,
factory settings will be loaded.
lpstat [ jobID ]
Example:
lpstat
Display active and queued jobs and printer status for a given
printer
or
jobID
. Specifying one of these parameters will
shorten the output and focus on the particular I/O port or print
job specified.
cancel jobID
Example:
cancel d1prn-10
Remove a job from an I/O port queue. Use
lpstat
to find a
particular job ID first.
start emi|fox
Example:
start fox prn
Begin a test on the PrintNet. The tests available are:
fox A continuous stream of text sent to the
attached printer. This is a good test for
troubleshooting hardware as long as the
attached printer supports text output.
emi This is reserved.
stop
Stop the current test running.
disable destination|ftpc|ftp|telnet
Example:
disable
Disable a protocol or disable a
destination
so jobs cannot
be queued to it. You can also disable ftpc, ftp, or telnet protocol
using the disable command.