Printronix PrintNet P8000 Line, Руководство пользователя

Страница: 65 / 240

Configuration using ARP
65
3. Use the
arp
command to add an entry into the Windows
station ARP table for the PrintNet. This is the most common
syntax for this command:
Syntax:
arp -s ipaddress ethernetaddress
Example for Microsoft
®
TCP stacks:
arp -s 192.75.11.9 00-08-96-07-00-60
This example specifies a PrintNet using IP address
192.75.11.9
and Ethernet address
00-08-96-07-00-60
.
4. Check if the ARP entry was accepted.
arp -a
You should see an entry in the listed ARP table with the IP
address and Ethernet address specified in Step 3.
5.
Ping
this IP address to see if the PrintNet can be seen on your
network.
At this point, you should be able to communicate with the
PrintNet from your local Windows station. This means the print
server knows about an IP address and subnet mask and has
these settings in its current memory. However, if the PrintNet is
power cycled, these settings will disappear unless you store
them into flash memory. To do this:
a. Load a Web browser on your Windows station and direct it
to the URL:
http://IPaddress
(e.g., http://192.75.11.9)
where IPaddress is the IP address of your PrintNet.
NOTE: If prompted for a “User ID” and password first, type
root
for the ID and press ENTER at the password
prompt (since there is no password by default).
b. At the “Network Configuration” HTML form that displays,
click in the field below the “IP Address” heading and type in
the IP address for the PrintNet.