Printronix PrintNet P8000 Line, Руководство пользователя

Страница: 113 / 240

113
Verify Printing on AS/400
This section verifies that the printer is capable of printing ASCII files
and that the printer can be pinged on the network.
To test ASCII printing:
1. Start TCP/IP, if it is not already running, by entering the
command
STRTCP
.
2. Verify that the AS/400 TCP/IP interface is active.
3.
Ping
the printer from an AS/400 workstation with the
command:
ping ip_address
.
Where
ip_address
is the Internet address of the remote
system printer (the PrintNet) or the hostname of the printer (if
you put the hostname in the host entry table as directed in
“Configuring A TCP/IP Host Table Entry” on page 105).
4. If the printer cannot be pinged, proceed to “AS/400 ASCII
Troubleshooting” on page 114.
5. Use one of the following methods to send a spooled file to the
printer:
•
Enter the LPR command on the AS/400 command line with
the appropriate parameters. See “To use LPR Manually”
on page -106.
•
Enter
STRRMTWTR name
on the AS/400 command line,
where
name
is the name of the AS/400 remote output
queue (not the printer Internet queue, as described on
“To Create an Automatic Remote Output Queue” on page
110).
•
Use the
WRKOUTQ
command to send jobs.