Printronix L5520, Руководство пользователя

Страница: 109 / 246

Downloading Into Flash Memory
109
40. If the software to be installed is already on the hard drive,
change to the drive and directory where the software resides,
then skip to step 43. If the software to be installed is on
diskette, continue with step 41.
41. Insert the diskette containing the software to be installed into
diskette drive A (or B) of the computer.
42. Make the diskette drive the active drive by typing the following
at the DOS prompt:
A:
<Return>
(If the diskette is in drive B, type
B:
<Return> )
43. Get the names of all of the logo, form, TIFF, setup, and font
files that you want to download by listing the contents of the
directory; at the DOS prompt, type:
DIR
<Return>
The downloadable files in the directory take the form:
file_name .dwn
Write down the complete name of each file with the
.dwn
extension.
44. Download the files to the printer by using the DOS
copy
command. Enter a command at the DOS prompt, such as:
copy /b file_name1.dwn+file_name2.dwn+... LPT1
<Return>
NOTE: The above command example assumes that LPT1 is used
as the download port from the computer, and that the
printer is already in download mode, waiting for file
download, before you copy the files to the printer. If you are
downloading the files using the LPT2 port on the computer,
substitute “LPT2” for “LPT1” in the above commands.
45. While the files are being copied into memory, the printer LCD
informs you of the load process and status. (Messages are
listed in the table on page 111.)