Printronix L5520, Руководство пользователя

Страница: 108 / 246

Chapter 3
Loading Flash Memory
108
31. On the printer control panel, press and hold down the
CLEAR keys. Without releasing the keys, power the
printer on. Continue holding the ONLINE and CLEAR keys
down.
32. When you see “WAITING FOR FILE DOWNLOAD” on the
LCD, release the ONLINE and CLEAR keys.
33. At the DOS prompt, type (for example):
123456.exe -pb
<Return>
where
123456.exe
is the emulation file you noted in step 26
(for an emulation on multiple diskettes) or in step 30 (for an
emulation on a single diskette). This command expands the
emulation file, then copies it as a binary file into the flash
memory in the printer.
NOTE: If you are downloading the file using the LPT2 port on the
computer, enter a DOS command such as:
123456.exe -pb2
<Return>
34. While the file is being copied into memory, the printer LCD
informs you of the load process and status. (Messages are
listed in the table on page 111.)
35. Wait until the new program has successfully loaded into printer
memory.
36. If you have any additional software to install (logo, form, TIFF,
setup, or font files), continue with step 37. If you have no
additional software to install, skip to step 48.
37. Set the printer power switch to O (Off).
38. On the printer control panel, press and hold down the
CLEAR keys. Without releasing the keys, power on
the printer. Continue holding down the ONLINE and CLEAR
keys.
39. When you see “WAITING FOR FILE DOWNLOAD” on the
LCD, release the ONLINE and CLEAR keys.