PREVOST X3-45 Multiplex, Руководство по обслуживанию

Страница: 448 / 1422

Rear Tandem or Single Carrier
Oil Leak
TP-99125
16579/24240 Issued 12-99
Printed in the USA © Copyright Meritor Automotive, Inc., 1999 Page 9
Rear Tandem or Single Carrier Oil Leak
Damaged?
Inspect the
breather.
Yes
No
Breather
clogged?
Clean or replace the
breather. A clogged
breather can cause
a seal leak.
Yes
No
Inspect the
pinion seal
for leaks.
Seal
leaking?
Replace the pinion
seal with a
unitized seal.
Yes
No
Joint
leaking?
No
Yes
Inspect the
carrier-to-housing
joint for leaks.
Test drive the vehicle to
confirm that the leak is
repaired. Return the
vehicle to service.
Visually inspect
the carrier in
the axle housing.
Remove the carrier
from the axle housing.
Repair the carrier
or install a
remanufactured
carrier.
Refer to MM 5.
Fill the carrier with the
correct amount of the
specified lubricant.
Refer to MM 1.
Clean the seal area.
Inspect the axle housing
welds for cracks or leaks.
If you find weld cracks,
contact Meritor for repair
welding procedures.
Test drive the vehicle
to confirm that the
leak is repaired.
Return the vehicle to
service.
Drain and inspect
the lubricant.
Refer to MM 1.
Remove the carrier
from the axle housing.
Refer to MM 5.
Clean and prepare the
housing and carrier
flanges. Apply the correct
gasket or silicone.
Refer to MM 5.
Install the carrier.
Refer to MM 5.
Fill the carrier with
the correct amount
of the specified lubricant.
Refer to MM 1.