Precor Experience Series Скачать руководство пользователя страница 87

Страница: 87 / 248

Forward Frame Filler Cover Replacement

Forward Frame Filler Cover Replacement

Description

Forward Frame Filler Cover

Removal Instructions

1. Remove the Goose Neck Gasket

, Goose Neck cover

, and Lift Top cover

see

"Lift Front Cover Replacement" on page 72

2. Remove the Accessory Tray cover

, see

"Accessory Tray Cover Replacement" on

page 77

3. Remove the Lift Rear cover

, see

"Lift Rear Cover Replacement " on page 77

4. Raise the crossramp to maximum using the System Tests - CrossRamp Test.

CAUTION

: Do not raise the crossramp from within a workout. The crossramp will

automatically lower to the default level when the workout times out. This unexpected
action could cause personal injury to extremities underneath the crossramp or the
area around the lift motor.

1. Remove the two #3 Phillip Forward Frame Filler cover

screws.

2. Then pull outward on the left and right frame weldment tabs located at the rear bottom

Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.

Page 79

6 Replacement Procedures

Covers and Panels Replacement

Содержание Experience Series

























































































































































































































































Результаты поиска

Содержание Experience Series

Отзывы:

Precor Experience Series, Руководство по обслуживанию, Страница: 87 / 248

Результаты поиска

Содержание Experience Series

Отзывы: