Precor Experience Series Скачать руководство пользователя страница 187 | Manualshive

Страница: 187 / 248

Precor Experience Series Скачать руководство пользователя страница 187

1. Remove the Top Lift cover, see

"Lift Front Cover Replacement" on page 72

.

2. Use a 3/16" hex key to remove the Fixed Arm Mounting Bar -

inner

and

outer

Nylock

set screws. Do not loosen and then retighten the Nylock set screw, this will compromise
the integrity of the Nylock patch. Discard and do not reuse the Nylock set screws.

CAUTION

: Do not reuse the

inner

or

outer

Nylock patch set screws for installation.

Either removing or loosening the Nylock set screw will compromise the integrity of
the Nylock patch. Discard and order new set screws for installation (see

, bubble # 252).

2. Remove the two 5/32" hex key Handlebar Mounting Clamp fasteners located at the

front top of the console mount weldment. Hold the arm while removing clamp.

3. Carefully remove the Fixed Arm from the fixed arm mounting bar and Handlebar mount.

4. Repeat procedure for both left and right Fixed Arms.

Installation Instructions

1. Reinstall the Fixed Arm onto Fixed Arm Mounting Bar and the Handlebar Mounting

Bracket.

Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.

Page 179

6 Replacement Procedures

Fixed Arms Replacement

«
...
185
186
187
188
189
...
»

Содержание Experience Series

























































































































































































































































Отзывы:

Нет отзывов